Join ePHOTOzine, the friendliest photography community.
Upload photos, chat with photographers, win prizes and much more for free!
Sigma launch first compact - Sigma have announced the launch of the DP1, a compact digital camera featuring a 14Mp Foveon x3 direct image sensor as used in the Sigma SD14 digital SLR.
The DP1 is a completely new type of camera offering the full spec. and high image quality of a DSLR in the body of a compact camera.
It is powered by the 14Mp Foveon X3 direct-image-sensor, which can reproduce high definition images rich in gradation and impressive three-dimensional detail.
It is possible to record images in RAW or the widely used JPEG in four resolution modes. It offers five Exposure modes and three Metering modes as well as being quipped with a built-in flash with the Guide Number of six, hot shoe, neck strap and 2.5in TFT colour LCD monitor with approx. 230,000px.
The DP1 has the high resolution and functionality of an SLR, plus adaptability in terms of accessories, all built into a small body. A wide range of accessories, optical viewfinder (VF-11), Lens Hood (HA-11), and Electronic Flash (EF-140 DG) are available for the DP1 camera.
Sigma introduced its digital SLRs, the SD9, SD10 and SD14 to the market in October 2002, November, 2003 and March, 2007. They have established strong support from a wide range of photographers, both amateur and professionals. Recently, demand for a compact digital camera with portability as well as high image quality has increased. In order to meet this demand, the new DP1 has been developed as a completely new type of camera with high image quality and features that would not be out of place in a full spec DSLR.
SLR-sized image sensor
The size of the image sensor used in the DP1 camera is 20.7mm x 13.8mm. It is approximately seven to twelve times larger than the 1/1.8in to 1/2.5in image sensors used in ordinary compact digital cameras. The pixel size of the image sensor is 7.8μm. The large photodiodes deployed at a large pixel pitch capture pure, rich light efficiently and give the DP1 its high resolution and richly-graduated tones.
Full-colour image sensor
The DP1 uses the same 14Mp (2652×1768×3 layers) direct image sensor as the SD14. Utilising the special features of silicon, which is penetrated to different depths by different wavelengths of light, this direct image sensor succeeds in full-colour capture with the full RGB in a single-pixel location. Just like film, each photodiode captures all the RGB data, so no final-stage demosaicing is required.
Brand-new TRUE image processing engine
The DP1 incorporates TRUE (Three-layer Responsive Ultimate Engine), the world’s first image processing engine suited for Foveon three silicon embedded layer direct image sensor. The unique image processing algorithm, which has been developed throughout the development of the SD9, SD10 and SD14 cameras, is incorporated into TRUE. It enables high-speed image processing and high image quality.
16.6mm f/4 lens designed exclusively for the DP1
The DP1 is equipped with a 16.6mm f/4 lens, equivalent to 28mm on a 35mm SLR camera, which has been designed exclusively for DP1. The large-diameter of aspherical glass provides low distortion and high contrast images. It also offers superior peripheral brightness. The super multi-layer coating reduces flare and ghosting. It allows photographers to take pictures in difficult light conditions. This lens and SLR-sized image sensor provides natural shallow depth-of-field.
RAW format recording
The DP1 includes JPEG recording format for convenience plus a RAW data (X3F) recording mode for retaining full image capture detail of the utmost quality. The RAW data format provides pure data for high-resolution images, and uses lossless compression for more compact, yet uncompromised, data files. The RAW data format of the DP1 keeps brightness and colour data in a 1:1 ratio without relying on interpolation. Each pixel location captures the full colour of RGB data, so in RAW, X3F files, brightness and colour data can be kept in a 1:1 ratio without relying on interpolation. When the image is processed in Sigma Photo Pro, it will preserve the balance of the natural data for the best photos with the best image quality.
Exclusive Sigma PhotoPro Software (Supplied with the DP1)
The DP1 comes complete with SIGMA Photo Pro software, a RAW image developer that converts all RAW data quickly and easily. Adjustments can be made in three separate modes. The X3F Mode stores the original settings of the image at the point of capture. In the Auto Adjustment Mode, the software analyses and automatically makes adjustments to the RAW data. The Custom Mode allows the photographer to make individual adjustments (exposure, contrast, shadow, highlight, saturation, sharpness and fill-light for example). The photographer can make changes easily and quickly by simply adjusting the slider controls within the software. The X3F Mode stores the original settings of the image at point of capture. Photographers` personal modifications can be saved to the RAW, X3F file for future use. SIGMA Photo Pro supports 8-bit TIFF, 16-bit TIFF, and JPEG file formats. The JPEG can be saved as YCbCr 4:4:4. It is also possible to half, or double the resolution when processing the image.
Compact and lightweight body
The DP1 has compact dimensions of 113.3mm/4.5in. (W) x 59.5mm/2.3in. (H) x 50.3mm/2.0in. (D) and weighs just 240g/8.5ounces. Its compact body and lightweight design makes it easy to carry everywhere.
Three metering modes and five exposure modes
The DP1 has three metering modes, Evaluative Metering, Center Weighted Average Metering and Spot Metering. It is also possible to select the exposure mode from Auto, Program AE, Aperture Priority AE, Shutter Priority AE or Manual. Exposure compensation can be set in 1/3 stop increments from +3.0 to -3.0 stops and an auto bracketing function is also available.
Pop up (manual) built-in flash
The DP1 is equipped with a pop up (manual) built-in flash featuring guide number of 6 (ISO100/ m). It is possible to use Normal Flash, Red-Eye Reduction Flash and Slow Synchro Mode. It also features flash exposure compensation in 1/3 stops increments.
AF Area Selection
The AF area of the DP1 is equipped with nine focusing points and it is possible to manually select the desired focusing point. The focusing distance is from 50cm to infinity, however, it is possible to shorten the minimum focusing distance to 30cm.
Manual Focus is available for photographers who like to take more control, or for use when autofocus or focus lock is not effective. It is also possible to magnify the display to ensure precise focusing.
It is possible to record 30f/p/s movies with QVGA (320 x 240). The digital zoom function can be used during movie shooting. A 1Gb memory card (not supplied) allows approximately 30 minutes of movie recording.
Large 2.5in TFT Colour LCD Monitor
The DP1 camera features large 2.5in, 230,000px TFT colour LCD monitor. The LCD monitor displays 100% of the images, allowing the photographer to easily and accurately confirm the image compensation.
The DP1 camera is equipped with a hot shoe, allowing use of the dedicated external flashgun EF-140 DG (optional) or high performance view finder VF-11 (optional).
Dedicated lens hood
This optional lens hood blocks out extraneous light. A hood adapter, designed to accept a 46mm lens filter, is included.
Pricing and availability:
DP1 - £549.99
DP1 + VF-11 View Finder - £599.99
VF-11 View Finder - £84.99
HA-11 Hood Adapter - £19.99
EF-140 DG Electronic Flash - £44.99
SAC-3 AC Adapter - £39.99
BC-31 Battery Charger - £39.99
BP-31 Li-ion Battery - £29.99
For more information, please visit the Sigma website.