Login or Join Now

Upload your photos, chat, win prizes and much more

Remember Me

Can't Access your Account?

New to ePHOTOzine? Join ePHOTOzine for free!

Like 0

Canon ip4500 problems

Join Now

Join ePHOTOzine, the friendliest photography community.

Upload photos, chat with photographers, win prizes and much more for free!

11 Apr 2009 - 9:43 PM

I have had this printer a while now, with no problems before, but now I can not get it to print right at all.
All prints have very faint lines running through (so faint my husband struggles to see them, but they are perfectly obvious and unacceptable to me).
I have tried cleaning, deep cleaning, print head alignment and turning on and off lots of times, but still the problem remains.
I only use canon inks. I have tried printing from ps elements, from dpp and downloaded easyphotoprints to print straight from there, as I have read others saying prints are best straight from there.
No luck.
I had an ip5000 before this, and that scarcely lasted a year before it printed so badly that I replaced it. Do others have these problems, or am I just unlucky? :-(
And does anyone know of a possible remedy? I was thinking of getting a bigger format printer, but there seem to be so many problems with reliability that it seems like more trouble than it's worth.

Sponsored Links
Sponsored Links 
11 Apr 2009 - 9:43 PM

Join ePHOTOzine for free and remove these adverts.

11 Apr 2009 - 10:02 PM

What kind of lines?

And don't be put off. I've had three Canon printers over the years and they're all still going strong; even my five year old, and well hammered, i850. Smile

11 Apr 2009 - 10:09 PM

Have you tried replacing the inks? What kind of paper are you printing on? I've had my ip4500 for several months now and so far no issues...

11 Apr 2009 - 10:13 PM

I've just replaced two inks that ran out. I'm printing on ilford Galerie classic pearl, which has been fine in the past.
The lines are like very fine and frequent lines of the printing being too faint, if that makes sense.

11 Apr 2009 - 10:15 PM

Sounds as if you have a head problem that may requre it to be changed. No idea what the cost is but I would put the money toward a larger format printer as you say. Presume it is out of warranty.

No matter what device you buy there will always be an issue with a certain number and of course these are the ones you hear about. I guess it is just a question of researching on google and getting a balance of opinions.

Upgrading to a large format printer can be cost effective. I use an Epson 3800 which cost around 800. However this included about 400 worth of ink which made it very good value. When I do have to replace a cartdridge the size means I am effectively buying in bulk so running costs are far less than say a R1800.

Helpful Post! This post was flagged as helpful
11 Apr 2009 - 10:23 PM

I'm afraid I've put myself off the idea of a large printer. The last batch of prints I wanted was so big it made financial sense to get them all printed professionally. I got 150 prints for less than I could have printed them for even with a cis and big printer, and i didn't have to spend much time over it, and there were no worries about print quality.
Since then I have just wanted a couple of a4's and I have spent all day messing about, without yet getting a single decent print! it just doesn't seem worth the hassle.

11 Apr 2009 - 10:42 PM

But I still really want to get this printer sorted and printing perfectly again. So if anyone has any suggestions, it would be appreciated.
It's somewhat reassuring that others are not having similar problems with their own printing.
My husband thinks the lines are so faint others may have them and not even notice, but I don't think so. I suspect most other photographers will be similarly fussy about their images once printed?
Btw, the nozzle check prints fine, and the print head alignment pages all look fine.

11 Apr 2009 - 10:51 PM

Are the lines evenly spaced ?. If so then I would suspect the head(s) but otherwise it could be a transport problem. I believe you can get a roller cleaning sheet.

Helpful Post! This post was flagged as helpful
Just Jas
Just Jas  1225752 forum posts England1 Constructive Critique Points
11 Apr 2009 - 10:52 PM

Could be the stepping of the roller that is at fault.

If it is out guarantee I would suggest getting an estimate for a professional repair and considering then whether it would be financially better to get a brand new printer.

11 Apr 2009 - 10:56 PM

I need to check, but I think it was less than a year since I bought it. (I've changed computers since then, so don't have access to old emails) Sounds like it may be a repair/ replacement then? The lines are very faint, but pretty evenly spaced I would say.
I got it from PC world. I don't hold out great hopes for customer service, I'm afraid.

dcash29  81908 forum posts England
11 Apr 2009 - 10:58 PM

are the lines vertical or horizontal to the printer?

11 Apr 2009 - 10:59 PM

Does the 4500 have roller and bottom plate cleaning options in the maintenance tab?

My 4600 sometimes leaves marks after a long print run and this clears it.

11 Apr 2009 - 11:04 PM

The lines are horizontal to the printer, but so close together as to almost look like an overall slightly faded effect.
I thought the bottom plate cleaning was for marks, rather than for faintness in the printing.

Last Modified By LeighRebecca at 11 Apr 2009 - 11:05 PM
dcash29  81908 forum posts England
11 Apr 2009 - 11:16 PM

i'd take the cartridges out, remove the head and wipe the head with a paper towel dampened in hot water. Replace and perform a deep clean.

Do you get the faints when printing on plain paper?

Last Modified By dcash29 at 11 Apr 2009 - 11:18 PM Helpful Post! This post was flagged as helpful
11 Apr 2009 - 11:23 PM

I may try that. But I would be worried about leaving bits behind from the paper towel.
Actually I accidentally printed on plain paper earlier, and thought the problem had gone, because I couldn't see the faint lines.

I do appreciate the advice, but I must get to bed now, so please don't think me rude if I don't reply. I will look in again tomorrow.
Thanks all.

Add a Comment

You must be a member to leave a comment

Remember me:
Un-tick this box if you want to login each time you visit.