Join Now
Join ePHOTOzine, the friendliest photography community.
Upload photos, chat with photographers, win prizes and much more for free!
Scenario: 7D with Canon 300mm f4 + 1.4 extender mounted on solid tripod to take bird/nest pictires. IS off and AF on and picture taken. Reviewing the picture it looks blurred.
Switch of AF, turn on live view and go to 10X magnification. Manually focus so image is sharp on the screen. Take photo and it is still slightly blurred when reviewed.
As above but after focussing turn off live view and take photo and it still looks a bit blurred! (cap fitted over eyepiece.
Is not the picture one sees on the screen in live view what the sensor sees? If so,why would sceen be sharp and picture taken blurred???
Most puzzling!
It could be a million and one things!! Probably camera shake or heat haze.
Quote: Is not the picture one sees on the screen in live view what the sensor sees? If so,why would sceen be sharp and picture taken blurred???
The picture on the screen is before the picture was taken, which doesn't necessarily equate to the picture that's been captured, i.e. camera shake, subject movement, etc. etc.
I tried to totally iliminate any chance of camera shake - should have said I was using a remote release. No wind so absolutely no movement of tripod.
Possibly heat haze. (Yes even at this time of year and the sun doesn't even have to be shining or the temperature particularly high). Atmospheric conditions can completely destroy image quality when using long focal lengths)
Now there's a challenge - EXIF? All the pictures are currently stored as RAW (.CR2) files. Presumably that will have all the capture data attached? Can I upload RAW images here or should I convert to .JPG or .TIFF?
OK, here goes: The red coloured stuff is bailing twine - probably picked up from a field somewhere, and when focused in live view I could see the individual strands. Here it's just a "lump".

True. It's the same lens AND the image on the live view screen is taken from the sensor, not via the prism etc. so it is a puzzle!
With some DSLR's you cannot auto focus with an aperture larger than f5.6. In this particular case, your f4 lens is reduced to f5.6 when you add the 1.4x extender. This may at least result in AF being difficult even if still possible.
Dave
Add a Comment
ePHOTOzine, the web's friendliest photography community.
Upload photos, chat with photographers, win prizes and much more.















