Upload your photos, chat, win prizes and much more
Can't Access your Account?
New to ePHOTOzine? Join ePHOTOzine for free!
Upload photos, chat with photographers, win prizes and much more for free!
Hi there i am having a problem at the moment with banding from the sky in my images. I am not sure what is causing it i have a nikon d300s and a sigma 10 - 20 mm in use most of the time.
On sunday i tried to process a picture from st marys light house that had been taken with a lee filters big stopper it seemed dark on the edges but was good where the most light was but when i tried to get rid of the dark edges i got banding not sure what i am doing wrong here,.
Also i whent out last night into newcastle it was cloudless skys and took a few on different white balances when i tried to change in camera raw i am getting banding again without anyother adjustment,.
Is this becasue i am using 14 bit in my camera instead of 12 bit or could it be a fault with my camera i am not sure what i am doing wrong for this to happen, if anyone could point me in the right direction it would be really good.
Join ePHOTOzine for free and remove these adverts.
This could be light drop off which is something from which a lot of lenses suffer. If you are using Lightroom you could try the lens correction tool, which is pretty good at resolving it.
Mind you on the shot above it could easily be just because there is less light pollution in the top left. Do you see the dark edges on all shots?
Banding in the sky or any gradient (especially false) can easily be caused by a poor monitor or monitor profile, or aggressive calibration.
Hi ian if i am using the big stopper yes but this must happen with everyone as you cant see through the filter and the brighter parts of the sky are always going to be brighter and darks are always going to be darker. But this shot doesnt have any filters on as i managed to get it all in the histogram it is just when i try to open up the sky to lighten it starts banding, but if i sharpen it starts to remove the banding but not totally.
Hi glenn i have a dell 2408wfp monitor and use a colormunki desgin to profile every two weeks.
I'm only on my work monitor at the moment, but it is normally pretty good and I have to admit I can't see banding in the photo above, just a fade from dark to light.
I have everything calibrated. monitor, printer, and photoshop cs6 i use prophoto rgb colour space in photoshop. But in camera it is set a adobe rgb does this make any difference?
My monitor profile is 120 luminance level and my target white point is D65.
It takes a fairly high-end monitor to eliminate banding altogether, but most of us don't notice it a lot of the time because photographic subjects more often than not don't contain perfectly formed gradients. When you calibrate a monitor you effectively forfeit some of its bit-depth, which is why selecting 'native' settings and taking a minimalist approach during calibration is often a good ideaŚmore so at consumer level (it's also why high-bit LUTs in mid-level monitors are quite an attractive feature).
You can get an idea of how your monitor behaves in this respect by trying something like the Lagom gradient test. In my case I can see how spending extra money might help, but your Dell is probably in better shape than mine. Ideally you should do the test outside of a colour-managed app (Opera or IE would do), otherwise the profile interferes with the resultŚcalibration and profiling being two separate actions which nonetheless interact.
Also my monitor is set at 32 bit not 16 bit
Quote: Also my monitor is set at 32 bit not 16 bit
I think you're talking about OS colour there, Andy, with 32-bit probably equating to 8-bit anyway (it gets complicated). In fact your monitor has an 8-bit panel and you calibrate it through the video card. That effectively means that when you adjust white point and gamma you lose significant bit-depth, and in a wide-gamut monitor bit-depth is worth clinging on to. If your software allows it, you could try applying 'native' white point and gamma.
Your monitor seems to have some history of banding, which might not be easy to address, but gentle calibration will help (the luminance target has no bearing on this because it's not a digital adjustment - 120-140cd/m▓ should be fine).
Hi glenn i did a measurement of the ambient light level it is 10.73 lux and the color munki says it will set to 80.00 cd/m2 is this correct or do i need to set it higher. Its quite a dark room in the dinning room.
Andy try resetting your monitor to factory defaults and turn off calibration just to see what happens with the banding.
Tried that chris still seems to be there!
ePHOTOzine, the web's friendliest photography community.
Upload photos, chat with photographers, win prizes and much more.
You must be a member to leave a comment
Get the latest photography news straight from ePHOTOzine in your email every month and win prizes!
1st July 2014 - 31st July 2014
Check out ePHOTOzine's inspirational photo month calendar! Each day click on a window to unveil new photography tips, treats and techniques.
View July's Photo Month Calendar