0

Studio lights for Product Photography

Forums > Lighting > Studio lights for Product Photography

Join Now

Join ePHOTOzine, the friendliest photography community.

Upload photos, chat with photographers, win prizes and much more for free!

Leave a Comment
    First · Prev | 1 | Next · Last

    Hi I have a product photography job, photographing tinned pet food at home but don't have any studio lights, what ones would you reccommend without spending too much money? Its my first product photography job. Any advice, much appreciated, thanks.

    Sponsored Links
    Sponsored Links
    2 Mar 2009 - 3:37 PM

    Join ePHOTOzine for free and remove these adverts.

    digicammad
    digicammad (e2 Member)
    8
    21547 forum postsdigicammad vcard United Kingdom35 Constructive Critique Points
    2 Mar 2009 - 3:54 PM
    0

    As you are photographing tins I would suggest you get yourself a small light tent instead of studio lights. You would only need a table top one. You could even use a desk lamp to light it, as long as you set your white balance accordingly or corrected in your raw processor.

    Ian

    jken
    5
    1653 forum posts United Kingdom1 Constructive Critique Points
    2 Mar 2009 - 3:55 PM
    0

    Have a look HERE

    D-LITE 4 Kit Complete under Birmingham.

    I remember asking exactly the same question about 2 years ago.
    I'd agree with Ian on the light tent, but i'd still get the studio lights to much faff messing about with the desk lamp + if you get more work because you produced good quality you'll hopefully get more work.

    Hope it helps

    jk

    Last Modified By jken at 2 Mar 2009 - 3:57 PM
    digicammad
    digicammad (e2 Member)
    8
    21547 forum postsdigicammad vcard United Kingdom35 Constructive Critique Points
    2 Mar 2009 - 3:55 PM
    0

    Some ideas here


    Quote: As you are photographing tins I would suggest you get yourself a small light tent instead of studio lights. You would only need a table top one. You could even use a desk lamp to light it, as long as you set your white balance accordingly or corrected in your raw processor.

    Ian

    Hi Ian Thanks for the advice, really appreciate it!!!! I have a Mini Photo Studio umbrella, would that be ok for photographing tins?

    digicammad
    digicammad (e2 Member)
    8
    21547 forum postsdigicammad vcard United Kingdom35 Constructive Critique Points
    2 Mar 2009 - 4:50 PM
    0

    It depends upon what sort of image you want. Most product photography I have ever seen or done has been as close to shadowless as possible, so a single light may not suit. That is where the light tent comes in, it allows a more all round spread of light.

    If you do go for a D-Lite kit it will probably come with a very useful dvd explaining the basics of studio lighting and there is also a section on product photography.

    DVD probably available separately from guess who !!

    http://www.warehouseexpress.com/product/default.aspx?sku=1017883

    Hi Thanks for the comments, really appreciate it, its helped me decide what to buy for product photography, ordered studio lights and a light tent with 4 colour backgrounds, looking forward to getting them in the post!!!!

    With tins I would use soft light, try shooting through a brolley . You can alsotry daylight on a bright day but just out of the sun. You should get even light and no reflection using this method. I used this to photograph swathes of coloured formica which are a nightmare under flash lighting.

    First · Prev | 1 | Next · Last

    Add a Comment

    You must be a member to leave a comment

    Username:
    Password:
    Remember me:
    Un-tick this box if you want to login each time you visit.