Christmas Prize Draw 2017

SabreSwitch TriggerBeam Pro TBP-1 Remote Trigger Review

SabreSwitch TriggerBeam Pro TBP-1 Remote Trigger Review - Reviewed: The SabreSwitch TriggerBeam Pro TBP-1 Remote Trigger Kit - everything you need to get setup in capturing wildlife and other moving subjects.

 Add Comment

SabreSwitch TriggerBeam Pro TBP-1 in Remote Releases

Features
Handling
Performance
Verdict
Specification

TriggerBeam Pro TBP-1

The SabreSwitch TriggerBeam PRO Remote Trigger can be used on its own or in conjunction with the SabreSwitch TriggerSmart kit. The sensor is designed to trigger your camera anytime something is detected in between the infrared transmitter and receiver beam. The kit comes with everything you need to get started including a cable to connect the sensor to your camera, two spikes to steady the sensors in the ground, as well as two waterproof covers. The only thing you need to add is 5 AAA batteries. 

TriggerBeam PRO Kit Features

TriggerBeam Pro (1)
The TriggerBeam PRO Kit is a long range infrared beam device. It is designed to easily capture images using InfraRed Beam Breaking, meaning that anything that goes in between the two devices will trigger the camera. A variety of stills and video cameras can be used, digital as well as film based. The IR Beam range is at least 20 meters in daylight and up to 30 meters in darkness.

The TriggerBeam PRO can be connected directly to the cameras remote trigger socket or it can be connected to the TriggerSmart MCT-1 control unit, offering the ability to tune the sensitivity of the sensors and delaying the triggering of the capture device. Choice of single exposures or continuous shooting over given time spans are also possible.

TriggerBeam Pro (2)
The TriggerBeam PRO can be used by to trigger stills or videos recording. The device lets you setup your camera without having to operate your camera yourself, which would normally scare away wildlife or other subjects. The TriggerBeam PRO could be used for Wildlife, Sports, Event Photography or Security applications.

The TriggerBeam Pro Kit includes: 1 x IR Receiver, 1 x IR Transmitter, 2 x Stakepods, 2 x weatherproof covers, 1 x 3 meter cable 3.5 mm to 2.5 mm, 1 x Jack Adapter 2.5 to 3.5 mm, 1 x 2 degrees IR Baffle. The TriggerBeam Pro Kit is available for £99 + VAT, or £118.80 including VAT.

TriggerBeam Pro Squirrel IMG 9807ab

Key Features

  • Range: Darkness 30 meter, Bright ambient light 20 meters approx.
  • Trigger Time: minimum beam break to trigger time 20 ms
  • Trigger delay time: up to 10 ms
  • IR Transmitter Beam: 10 degrees
  • Wavelength: 950 nm
  • Trigger Outputs: direct to camera or via TS Control unit
  • Power: Transmitter 3 x AAA batteries, Receiver 2 x AA
  • Operation time: with good batteries up to 60 hours

TriggerBeam PRO Kit Handling

The controls on the device are very easy to use, with one switch, which is used to switch each device on, when used on it's own, or the main device can be switched to be controlled with the TriggerSmart controller. When used with the TriggerSmart controller you don't need to put any batteries in the main TriggerBeam, as it can then get its power from the controller unit. You simply need to line up the beam so that the sender and receiver are correctly lined up, when the signal is broken by something entering the infrared path, this will then trigger the camera to shoot.

Battery life is rated at 60 hours, which should outlast most cameras, unless you are using a power adapter with your camera. The TriggerBeam, uses 2x AAA batteries in one unit and 3x AAA batteries in the Infrared sender. To put the batteries in, you need to undo two Philips screws and open the units. 

TriggerBeam PRO Kit Performance

Additional sample photos and product shots are available in the Equipment Database, where you can add your own review, photos and product ratings.

Sabre Switch TriggerBeam Pro TBP-1 Sample Photos

The TriggerBeam PRO works very well, detecting the rapid and often quick moving squirrels. It's then down to your camera whether it can correctly and quickly focus on the subjects. We used auto focus for these photos with the Canon EOS 7D Mark II, and placed nuts in the same position to encourage the squirrels to pause briefly when they would be in the correct position to break the infrared beam. The TriggerBeam and camera took several hundred photos, and was able to quickly trigger the camera as soon as the squirrel entered the sensor's detection area. The sensor was more precise than the TriggerScout PIR and with smaller subjects the beam was not always broken. 

Value For Money

The TriggerBeamPRO kit is available for £118 (including VAT) from RobertWhite, which makes it good value for money as a complete kit, ready to use. There are a number of other remote triggers available on the market, including the TriggerScout PIR kit

TriggerBeam PRO Kit Verdict

The TriggerBeam PRO kit makes it very easy to get started with remote shooting and detection of wildlife and other moving subjects. Everything you need is included in the box, apart from the AAA batteries, and you get a lot of kit for your money. The kit will work with most Canon and Nikon cameras, with optional adapter cables available if your camera doesn't have a 3.5 or 2.5mm remote socket. For those that are interested in capturing wildlife then the TriggerBeam PRO is an excellent starting kit that is easy to use, and can deliver results quickly. 

TriggerBeam PRO Kit Pros

Easy to use
Effective
Works with a number of cameras
Adapters available for other cameras
Weatherproof cover included

TriggerBeam PRO Kit Cons

Uses 5 x AAA batteries in total
Replacing batteries requires unscrewing the units

FEATURES  
HANDLING  
PERFORMANCE  
VALUE FOR MONEY  
VERDICT  

The TriggerBeam PRO Kit makes it easy to get started with remote shooting and you get a lot of kit for your money.

 

Join ePHOTOzine and remove these ads.

Explore More


Comments


ARJones 12 103 3 United Kingdom
19 Dec 2014 3:56PM
First time back on here for a while and I have to say that I find this review of the SabreSwitch remote trigger kit to be quite disjointed and poorly written. Is it just me?

Join ePHOTOzine for free and remove these adverts.

GarethRobinson 12 1.0k 2 United Kingdom
29 Dec 2014 12:50PM
The kit would not be my choice for nature work, no matter how well the review could be written.

Sign In

You must be a member to leave a comment.

ePHOTOzine, the web's friendliest photography community.

Join For Free

Upload photos, chat with photographers, win prizes and much more.