Amazon Kindle Unlimited Offer: 1-Month For FREE!
How do you mount your prints ?
I used a domestic iron with Adamski dry mount sheets. At the time a heat controlled iron with a rectangular base (similar to a domestic iron) was available as a alternative to a dry mount press.
However, this was nearly 40 years ago!
Yuo could try Hermafix from Speed Graphic. Never tried it myself though.
jas
However, this was nearly 40 years ago!
Yuo could try Hermafix from Speed Graphic. Never tried it myself though.
jas
Thanks, guys, for all your comments - very much appreciated.
I have reservations about using a domestic iron on the print - I can imagine ending up with chemicals on the iron and getting into all sorts of strife ! Looks like the best solution might be to have a pot of cow gum on the table while I apply acid-free tape to one edge of the print.
Thanks again
John
I have reservations about using a domestic iron on the print - I can imagine ending up with chemicals on the iron and getting into all sorts of strife ! Looks like the best solution might be to have a pot of cow gum on the table while I apply acid-free tape to one edge of the print.
Thanks again
John
