Regatta Offer: Save 15% on 'Top Picks' With Code TP15

Panasonic Leica 100-400mm reassembly


GwB Plus
1 73 United Kingdom
27 Sep 2021 8:34PM
Hi

I dismantled front end of my lens to remove a hair that somehow got between the front two elements. To remove the glass there were 3 bushes that I had to pop out found that they twist and adjust position of the front element, does anyone know if this is for fine tuning or to make sure glass is pushed tight to the bezel for sealing purposes as I should imagine that screwing the front back on would push the glass back maintaining alround contact between the bezel and glass.

Thanks

Gra.
LenShepherd 13 4.4k United Kingdom
29 Sep 2021 6:53PM
I have no experience of this type of adjustment - though I speculate it might be the lens manufacturers intention to make the angle of the front element relative to the bayonet plane fine tune adjustable.

All I can suggest is taking images of something like a newspaper with fine print, taking steps to ensure that the camera sensor is exactly parallel to the newspaper - and then checking if each corner of the image has similar sharpness.
GwB Plus
1 73 United Kingdom
29 Sep 2021 9:21PM
Thanks Lenshepherd, this was my thinking as well, took some pictures of a newspaper and checked for focus all round, seems ok.

Sign In

You must be a member to leave a comment.

ePHOTOzine, the web's friendliest photography community.

Join For Free

Upload photos, chat with photographers, win prizes and much more.