Visico5
I’m hoping someone can advise me on getting my Visico5 to work with godox trigger. I have a Godox V1 and AD200Pro and use the XPro transmitter to fire both, I purchased the Godox X1R-N, connected the receiver with sync cords that came with the X1R to the Visico5 but won’t fire the Visico with the X1R test button.
Any ideas how I can get the Visico5 to fire using the XPro transmitter and X1R, I know I if it did fire I would have to change settings on Visico5 with the Visico transmitter. All are set to the same channel and group. I can get my Nikon SB700 speed light to work with the X1R receiver..
Any help would greatly be appreciated
Thanks
Any ideas how I can get the Visico5 to fire using the XPro transmitter and X1R, I know I if it did fire I would have to change settings on Visico5 with the Visico transmitter. All are set to the same channel and group. I can get my Nikon SB700 speed light to work with the X1R receiver..
Any help would greatly be appreciated
Thanks
Many thanks HTH for getting back to me what you say is really helpful. I’ll try what you say and get a Godox transmitter and try it the only transmitter I have is the XPro. It’ll probably be worth it as the Visico5 is a 400W and is a cheaper option then buying another AD200.
Thank you.
Thank you.
Sent the X1R back to Amazon and purchased the X2T. Put it on the camera and was able to fire Godox lights, put Nikon Speedlight on top X2T and the Speedlight worked, put the Visico5 transmitter on top of the X2T and Godox lights fired but the Visico light didn't. Time to give up, shame I was hoping it would work.
Many thanks for your help and advice.
Many thanks for your help and advice.
